Giới thiệu Module đo và điều khiển nhiệt độ chính xác cao, có cả sensor và giao tiếp Uart XY-WT01

Mô tả sản phẩm
       Module đo và điều khiển thiết bị theo nhiệt độ, độ chính xác cao, gồm senser.

Thống số kỹ thuật
Điện áp hoạt động: 6 - 30VDC

Dải nhiệt độ: -50 ~ 110 độ C

Chính xác: 0.1 độ C

Module có 2 chế độ làm việc cơ bản

- HeatingMode 'H'

- Refrigeration mode 'C'

Product Function:
Set Temperature ---- SetT;

Backlash Temperature-----BackT;

1. HeatingMode'H':

When Temperature≤SetT -BackT;Relay conduction, heating equipment begin to work;

WhenTemperature≥SetT,Relaydisconnect, heating equipment stop work;

2. Refrigeration mode'C':

When Temperature≥SetT+BackT;Relay conduction, refrigerationequipment begin to work;

When Temperature≤SetT;Relay conduction, refrigerationequipment stopwork;

3. High Temperature Alarm'ALA':

When Temperature≥AlarmTemperature,The system opens the sound and light alarm, and disconnects the relay, any key stops the sound light;

4. Delay Start‘OPH':

When a normal heating or refrigeration work is done, the system starts to timeT, and only after theT≥OPH, the system can carry out the next round of heating or refrigeration work;

5. Temperature Correction FunctionOFE(-10.0 ~ 10.0°):

The system will work for a long time and may have deviations that can be corrected by this function,Temperature =Measured +Calibration;

6. Parameter Remote Read/Set:

The parameters such as setting temperature, backlash temperature and temperature correction can be set through UART.

7. Real-time Temperature Report:

If the temperature reporting function is turned on, the product is transmitted to the terminal by the UART at 1s intervals, which facilitates data collection;

8. Relay enable (default enable):

If the relay is disable, the relay remains disconnected;

9. Restore factory Settings:

At the same time press the STOP, set key more than 3S, restore factory settings;

Working modesetting /backlash temperature:
1. In the running interface, short pressSET key, enter the Quick setting interface;

2. After entering the Quick Setup interface, switch the parameters

3. Through theUP DOWN key, modify the parameter value, support short press/long press;

4. Long pressSET to build more than 3S or continuous 6S without any key operation, exit quickly set the interface, and save parameters;

Alarm temperature/delay Start /temperature correction:
1. In the operating interface, long pressSET more than 3s, enter the parameters to set the interface;

2. Enter the parameter to set the interface, through the short pressSET key to switch to set the parameters;

3. through theUP DOWN key, modify the parameter value, support short press/long press;

4. Long pressSET3s above or continuous 6S without any key operation, exit parameter set interface, and save parameters;

How to turn on high temperature alarm (default off):
Enter the parameter setting interface, switch to the alarm parameterALA, turn on or off the high temperature alarm function by short pressing theSTOP button, and if the high temperature alarm function closes,ALA displays