Giới thiệu Giá đỡ bàn chải đánh răng bằng tia cực tím chống vi khuẩn có đèn LED sạc lại tự động

Specification :
Model: M01
Product name: UV toothbrush box
Product model: M01
Product color: white, pink
Working temperature: 15~45°C
Rated voltage: DC5.0V
Output current: 600mA
Battery capacity: 2400mAh
Full time: 5 hours
Product size: 200*72*42 (mm)
Installation method: SMD installation

Package Includes :
1 X  UV Light Toothbrush Sterilizer Holder Only  (or with Toothpaste Dispenser)
1 X Storage Base
1 X Charging Cable

UVC Sterilization
Type-C Charging
Turbine air drying
2400mAh battery
Electric quantity remind

01. Strong sterilization
UVC ultraviolet sterilization
The use of medical grade ultraviolet germicidal lamp can quickly destroy the molecular structure of bacteria, cause the death and regeneration of bacteria, and suppress the growth of bacteria. The sterilization rate is as high as 99.9%

Professional germicidal lamp
UVC is short wave ultraviolet, wavelength 200 ~ 275nm, also known as short wave sterilization ultraviolet, widely used in hospitals, air conditioning systems, disinfection cabinets, drinking fountains and other fields.

02. Turbo fan drying
Built in turbofan
Built in exhaust fan can quickly dry the water droplets attached to the toothbrush bristles and discharge bacteria and viruses at the same time

04. Screen display
Sterilization lamp display
Power check
Display status when charging
Display status during sterilization

05. Slide design
Gently - scratch to open the cover
Sliding cover open design, easy to use, good experience.

06. Automatic extrusion
Automatic squeezing toothpaste
Squeeze out gently
For the first time, the toothpaste needs to be extruded for many times to exhaust the internal air, so that the toothpaste can be extruded smoothly, and the dosage increases gradually.

How to install toothpaste
Turn the toothpaste down clockwise

08. Long battery life
Double battery cell, 2400mAh, high capacity
Use time about 25 days (average 20 minutes per day)
Full charge time is about 5 hours (please use national standard charging head, 1A or above)
Tpye-C interface
Current input: 5V = 0.6A

Simple installation
The hanging board is equipped with strong 3M glue, without drilling.

Install steps
1. Remove the fixed hanging board.Gently push the fixed hanging board from the back of machine,and then take it out.
2. Clean the surface of installation wall. Clean the dust and foreign matters,please keep the wall clean.
3. Tear off the back glue protective film of fixed hanging board. Pay attention:please avoid sticking dust and foreign matters on the back glue.
4. Install the fixed hanging board. Comfirm the hook up,and stick it to the target position and press firmly.please make the fixed board stick on the wall firmly.
5. Then install the main sterilization machine after 24 hours. Be sure to wait until 24 hours later, please wait for the fixed board stick firmly before installing the main machine.
6. After installation,you can hanging up the toothbrush and start sterilization