Aurorawell DIY Receiver Module Power Amplifier Board AB/D Selectable for Music Player
Mô tả ngắn
Mua Aurorawell DIY Receiver Module Power Amplifier Board AB/D Selectable for Music Player giá rẻ nhất ở đâu?: Còn hàng
Nước ngoài
156,000₫
Sản phẩm cùng danh mục
Gợi ý từ dữ liệu sản phẩm đã index trên TecKi.
Sản phẩm cùng tầm giá
Các lựa chọn gần mức giá hiện tại để người dùng so sánh nhanh.
Giới thiệu Aurorawell DIY Receiver Module Power Amplifier Board AB/D Selectable for Music Player
Welcome to the [aurorawell] storeFollow the store and enjoy the discount.
Every week, creative new products are on the shelves.
Selling is not the end, but the beginning of the promise!
[Before ordering]
Please read the dimensions and other related content carefully before purchasing.
[shipment precautions]
✎The actual product is the same as the image displayed on the page.
Shipped within 24 hours after delivery
✎ Normally, transportation takes 15-20 working days.
✎ Shipping costs are automatically displayed by the shopee system.
Please contact the owner if you have any questions.
I wish you a happy shopping!
_______________❀Product Details❀_______
1. [ 5.0 Chip and Micro 5p Interface Powered] 5.0 chip, stable transmission; Micro 5p interface power supply, ordinary mobile phone 5V2A charging cable can be used.
2. [Button Control] The power amplifier board is with button control, it is convenient for you to control up and down songs, volume increase and decrease, play, pause, switch machine, etc.
3. [ Output] output ports x2 groups (one for each left and right channel) cannot be used with the headphone plug at the same time. Output Interface: 3.5mm stereo (reserved solder joints, you can DIY)
4. [3.5mm Headphone Plug] When connecting headphones, the device will automatically switch to headphone output and stop the signal from the output port of the power amplifier board.
5. [Stereo Amplifier Output] The signal of phone, and can be received to the stereo output, also connecting to 3.5mm ordinary headphones. (without a mic, does not support voice chat)
Specification:
Item Type: DIY Receiver Module
Material: PCB
Version: V5.0
Name: JH-BT
Maximum Receiving Distance: More Than 10m / 33ft
Power Output: Stereo 2x5W
Output Mode: AB/D Selectable
Driver Impedance: 2-4-8 Ohm
Power Supply Interface: Micro USB 5V DC (recommended 5V/3A, if 5V/2A power supply is used, due to the large operating current in class D mode, it needs to be switched to class AB mode, it is recommended to play more power in class D mode of 5V/3A Large) Users need to bring their own USB adapter and micro power supply cable (reserved 2.5mm welding port, this model does not support battery power supply)
Headphone Output Interface: 3.5mm Stereo
Output Interface: 2x2PIN / 5mm Spacing (cannot be output to power amplifier)
: 2-8 ohm 5-10W speakers can be connected respectively, 4 ohm 10W speakers are recommended.
Installation: When installing the board, the antenna should not be close to the metal parts as much as possible, so as not to affect the transmission distance.
SNR: 90DB
Total Harmonic Distortion +Noise:-70DB
Crosstalk: -86db
DNR: 91db
Transmission Protocol: A2DP/AVCTP/AVDTP/HFP
How to Use:
Take out the product and use it.
Package List:
1 x DIY Receiver Module
