Giới thiệu Treee Ván Trượt Điện Tử Điều Khiển Từ Xa

______________♤Welcome Treee Store♤_______________

✔Ready Stock!!Buy Now!
✔Quality Checked
✔Best price

★Surprises for you★
☛Free Gifts:Follow Shop
❤“Like” 5 Items: Priority Shipping
✉Sent me Screenshot and Message on your order : "Free Gift"，if not will Miss

✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug)
➷Wholesale retailers are welcome to negotiate long-term business with us!
__________________❀Product Information❀__________________

⭐️Features:
1. Made of high quality chip and electronic components, single drive design can offer excellent and stable performance. 
2. The solid structure of mainboard can greatly lengthen the service life. With remote receiver module, so it supports remote control. 
3. The well-organized circuit board is easy to install, but needs professional skills. 
4. This electric longboard skateboard control system has EMP control module with remote module, it can do as ESC do.
5. With over-voltage, under-voltage, overheating, over-current protection, safe and reliable to use, supports speed control, easy to use.
6. With a LED indicator that displays signal status, speed modes, battery percentage.

⭐️Specifications:
Single Motor Drive ESC:
Rated Voltage: 36V
Current: 12A
Power: 430W (36V)
Rotate Speed: 3000rpm
Max Speed: 35km/h
Drive Mode: FOC
Sensing Mode: Hall
Max Load Bearing: 120kg
Protection: Over-voltage, Under-voltage, Overheat, Stall, CW/CCW, Overcurrent, Speed Control
 

⭐️Package List:
1 x Control
1 x Remote Control Transmitter
1 x LED Battery Indicator
1 x Switch
1 x USB Cable

⭐️How to choose the right controller:
1. Confirm how much voltage your battery is 6 string battery is 25.2V 7 string is 29.4V 10 string battery is 36V
2. Confirm the type of motor, external motor chain, belt drive, belt type controller, hub motor, motor integral wheel. Please select the controller of the wheel type.
3. Confirm single drive or four drive. One controller drives a motor to be a single drive. One controller drives two motors to be a double drive. One controller drives four motors to be four-wheel drive. 
The remote controller matches the main controller with a signal description:
1: Connect the main control to the power supply
2: The power is turned on, wait for two seconds, then press and hold the key for about 6 seconds. Wait until the switch indicator flashes.
3: Turn on the remote control switch and use a small screwdriver to press the button inside the small hole in the lower left corner of the remote control.
4: The remote control is turned off for two seconds and then turned on. Wait for the remote control signal light and the switch signal light to flash at the same time to indicate that the match is successful!

⭐️Note:
1. The driver board is a high-precision circuit board. Do not touch the metal object/liquid to the board before and during use to avoid internal short circuit! 24V ESC must use a voltage above 24V, the maximum voltage can b