Giới thiệu Bộ Sạc Pin Thông Minh Liitokala lii-100 lii-202 lii-PD4 lii-s4 Ni-MH Ni-Cd Có Màn Hình LCD

◆ Thank you very much for choosing my store products among thousands of stores. i think that's fate!
◆ I'm glad you 've become my client, and i hope to continue to enjoy your trust in the years ahead!
◆ Our support is the cornerstone of our growth and development, drive to deliver quality services!

A hundred percent of the products are authentic, good quality, durable and quality after @ - @ sales service, so you can buy without worry!
If you have any questions about shopping, we will help you solve the problem immediately!

Our charger price does not contain batteries, please buy them separately, thank you!

Lii @ - @ 100 lii @ - @ 202

I, charger requirements and functions:

- Micro usb dc 5v input, single slot independent charging and management system
- 2 charging current options available (500ma/1000ma)

3. Led display charging state 25% 50% 75% 100%

- 可自动识别锂电(Li-ion)电池及镍氢(Ni-MH)电池和手动选择磷酸铁理(Liepo4)电池,(自动识别1.2V/3.7V电池, 手动选择3V/3.85V电池)

- With 0v voltage activation function, 1.6-2.2v cannot be charged

- There are detection protection for overcharge, short circuit, smart identification of bad batteries and back @ - @ up batteries.

- Charging mode, constant current constant pressure

- Dc input, charger working power supply 5v - 1a (micro travel charger head)

- With standard 5v/1000 ma usb automatic identification output function,

Ii, description of keys and functions

- Charger with a button, select charging current, easy to use current button. Press the select key and maintain 2 seconds 500ma to convert 1000ma charge current, gently press the select key to change the rechargeable battery and enter the charge state for 5 seconds (e.g. 3v 3.85v).

- The charger is connected to a 5v power supply, and all leds are instantly bright. if the battery is not put into the charging exercise, 500ma (led) shows that the bad battery led light is detected flashing.

- Automatic identification of lithium 3.7v (li @ - @ ion) and nickel @ - @ hydrogen 1.2v (ni @ - @ mh) when the charger is connected to the battery,

Iron phosphate 3.0 v (liepo4) and lithium 3.85 v (li @ - @ ion) need to be manually selected and charged 5 seconds after charging is selected. When the system is charging by default, click select key to query battery type and not change other functions

Charger lii - s4 instruction

I, 警告:1.此充电器只可以充圆柱锂离子电池(3.70V/3.85V),镍氢/镍镉(1.2V),磷酸铁锂电池(3.20V);2.在使用前,请认真参考说明书,注意充电电池的推荐充电电流,不要超过推荐电流充电; 3.选择使用5V DC适配器, 输出电流需不小于2A(安培); 4.充电器充电时可能会发热,注意不要烫伤;请置于儿童够不着的地方充电; 5.停止使用时,请拔掉电源,拔除电池;6.只可以在室内常温下使用;7.此产品检测数据仅供参考,实际情况请参照专业仪器.

Ii, 充电器规格及功能: 1. 采用DC5.0V2A(标称)输入,四槽独立充电及微电脑管理系统; 2. 此款充电器最大亮点是可以不分极性给电池充电!3. 充电电流共有三档 0.5A /1.0A/2.0A,默认0.5A充电,可长按对应按键选取充电电流;4. 充电时,LCD可显示通道CH及该通道的充电电流,电压,时间,容量和电池类型Li-Fe 3.20V/Li-ion 3.70V /Li-ion 3.85V (IMR);两槽的充电电流总共不超过2A,即当其中一槽以2A电流充电,再放电池在另一槽充时,前面2A电流会回落到1A电流充电;电池充满时,LCD会显示FULL;5. 可自动识别锂电(Li-Ion 3.70V)电池及镍氢(Ni-MH)电池,手动选择磷酸铁锂电池(3.20V)和 Li-Ion 3.80V电池(IMR);6. 有0 V电压激活功能, 1.65-2.20V不能充电(但会有激活电流涓流型式充电). 7. multi @ - @ security protec