Mô Đun Cảm Biến Áp Suất Nhiệt Độ I2C / Spi Bmp280 3.3v Bmp180 Bmp085
Mô tả ngắn
Mua Mô Đun Cảm Biến Áp Suất Nhiệt Độ I2C / Spi Bmp280 3.3v Bmp180 Bmp085 giá rẻ nhất ở đâu?: Còn hàng
Nước ngoài
Sản phẩm cùng danh mục
Gợi ý từ dữ liệu sản phẩm đã index trên TecKi.
Sản phẩm cùng tầm giá
Các lựa chọn gần mức giá hiện tại để người dùng so sánh nhanh.
Giới thiệu Mô Đun Cảm Biến Áp Suất Nhiệt Độ I2C / Spi Bmp280 3.3v Bmp180 Bmp085
I2C / SPI BMP280 3.3V Digital Module Replace BMP180 Bmp085 Temperature Barometric Pressure Sensor ModuleBMP280, the precision sensor from , is soldered onto PCB.
It uses both I2C and SPI (supports 3-, 4-wire SPI) interface
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
BMP280 Features
Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
VDDIO interface voltage range: 1.2 V to 3.6 V
Current consumption 1.8 uA @ 1 Hz humidity and temperature
2.8 uA @ 1 Hz pressure and temperature
3.6 uA @ 1 Hz humidity, pressure and temperature
0.1 uA in sleep mode
Operating range -40...+85 C, 0...100 % rel. humidity, 300...1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled
Package included:
1*BMP280 Module
#I2C #SPI #BMP280 #3.3V #Digital #Module #Sensor
Chi Tiết Sản Phẩm
| Hạn bảo hành | Không bảo hành |
|---|---|
| Loại bảo hành | Bảo hành nhà cung cấp |
