Mô đun điều chỉnh điện áp Xl4015 5A 5-36V 75W chuyên dụng

5A constant voltage constant current step-down power module with display LED drive lithium battery charging

With voltage, current, and power display, it can be used easily without a multimeter, and it is powerful!

With USB interface, with 3 major functions, it can satisfy most of your occasions!

Module highlights

1. Onboard voltage, current, power meter, you can easily use this module without a multimeter, which is more convenient and intuitive.

2. The onboard USB interface can easily charge your digital products. (Note: The USB output voltage is the same as the module output voltage, not a fixed 5V output, please confirm before charging the USB device)

3. High power, high efficiency, 5A, low ripple;

4. Three major functions:

(1) Use as an ordinary step-down module with over-current protection capability;

(2) Used as a charger for various voltage values ​​of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery packs), used in solar panels, wind generators and other occasions;

(3) Use as a high-power LED constant current drive module;

5. With two modes of constant voltage and constant current, there are indicators to indicate which mode the module is currently in;

6. When used as a lithium battery charger, the float voltage and charging current can be set, and an indicator light indicates

Indicates whether it is charging or fully charged;

7. With current-limiting protection function, the module will not be burnt out even if the output is short-circuited.

8. The onboard voltage and ammeter can be self-calibrated, and there will never be inaccurate problems!

9. With heat sink, free copper pillar!
Module parameters

Input voltage: 5-36V

Output voltage: 1.25-32V continuously adjustable

Output current: adjustable, maximum 5A (recommended to use within 4.5A)

Output power: maximum 75W (recommended to use within 50W, please reduce the power when using large pressure difference)

Working temperature: -40~+85 degrees

Working frequency: 180KHz

Conversion efficiency: up to 96%

Short circuit protection: Yes

Over-temperature protection: Yes (automatically shut down the output after over-temperature)

Input reverse connection protection: None, (if necessary, please insert a high-current diode in series in the input)

Installation method: 4 3mm screws

Wiring mode: wiring terminal or welding terminal, V-IN is input, V-OUT is output

Module size: length 68.2mm width 38.8mm height 15mm

Weight: 35g
Scope of application

1. Use as an ordinary step-down module with over-current protection capability

Instructions:

(1) Press the button on the right to adjust the digital meter to the [Display output voltage] interface, and adjust the "constant voltage potentiometer" to make the output voltage reach the voltage value you want;

(2) Adjust the digital meter to the [Display output current] interface, and directly short-circuit the output terminal of the module (just find a thick wire to short-circuit the output term