"describe:
1. Input voltage: DC4.3V~5.5V/1.5~2A, if the voltage exceeds this range, it will alarm and stop charging
2. Output voltage: 5V±0.1V,
3. Charging current: 500mAh-1000mAh
4. Charging power: up to 5W
5. Conversion efficiency: greater than 73%
6. Transmission distance: maximum 10mm, the recommended distance between receiving and sending is 2mm~4mm
7. Standby power consumption: average power consumption is less than 50mW
8. Over-temperature protection: when the temperature is higher than 60° during charging, the charging will stop automatically for 1 minute, and then recharge after the temperature drops.
9. Over-current protection: When the output current is greater than 1.5A during charging, the charging will be automatically stopped to prevent damage to the charger
10. Executive standard: Qi wireless charging standard
11. Size: about 6.9x6.9x1cm
12. Product specifications: 12.5*12.5*2 (package size)
13. Product weight: 50G
14. Whether to support foreign body detection: support
15. Indicator light function: green light on charging, red light on standby, double flashes for failure
16. Smart phone wireless charger under standard IQ
17. You can easily charge your phone without using your own data cable, just put the phone on the charging board
(Reminder: This charging base does not have a built-in battery, it needs to be connected to a power source)
18. Positioning and charging guide LED indicator
Specification:
Loading distance: 4-10mm
Input: DC5V, 1500mA
Frequency: 100-200KHz
Compatibility: All Qi standard phones
Include list:
1* wireless charger (not including US/EU/QC3.0 charger)
1*Micro USB cable
1*User Manual"
Chi tiết sản phẩm| Loại bảo hành | Không bảo hành |
|---|
| Hạn bảo hành | Không bảo hành |
|---|
| Không dây | Có |
|---|
| Loại cáp điện thoại | khác |
|---|