Without backlight, the display content on the last screen can be kept for a long time after power failure
Power consumption is very low, basically only during the refresh power consumption
SPI control interface, can access Raspberry for Pi/Jetson Nano/Arduino/STM32 and other main control board
Onboard level conversion chip, compatible with 3.3V and 5V microcontroller interface
Provide complete supporting information manual (driver board schematic diagram, Raspberry for Pi/Jetson Nano/Arduino/STM32 and other sample programs)
Working voltage: 3.3V/5V
Communication interface: 3-wire SPI, 4-wire SPI
Dot pitch: 0.169 x 0.169mm
Resolution: 480 x 280pixels
Gray level: 4
Partial refresh: 0.3s global refresh 3s
Refresh power consumption: 50mW(typ.)
Sleep current: Less than 0.01uA (close to 0)
Viewing angle: Greater than 170degree
Colour:blue
Material:Plastic + Metal
Size:96.5 x 58MM
Display size: 47.32 x 81.12mm
Chi tiết sản phẩm| Chất liệu | Sợi tổng hợp |
|---|
| Tên tổ chức chịu trách nhiệm sản xuất | Đang cập nhật |
|---|
| Địa chỉ tổ chức chịu trách nhiệm sản xuất | Đang cập nhật |
|---|
| Hạn bảo hành | Không bảo hành |
|---|
| Chất liệu dây đeo | Silicone |
|---|
| Loại bảo hành | Không bảo hành |
|---|