#DC #4-9V #Drive #Stepper #Motor #Screw #with #Nut #Slider #2 #Phase #4 #Wire #For #Laser
Features:
Micro Sliding table fit for DIY laser engraving machine as its XY axis
Screw thread pitch: 0.5mm (a step moving 0.025mm, as required for smaller can be used to segment the driver)
The speed of a straight line is the maximum 25mm/s
4 Wire: Blue A +, Black A-, Red B +, Yellow B-
Note: The stepper motor is not rotating with power. Need stepper motor drive board and control panel.
Specifications:
Motor Type: 2 Phase 4 Wire
Driving Voltage: DC 4-9V 500mA
Step Angle: 18°
Screw Length: 90mm/3.5"
Screw Diameter: 3mm/0.1"
Slider Width: 15mm/0.6"
Effective Stroke: 80mm/3.1"
Screw Pitch: 0.5mm/0.02"
Stage Size: 105x15mm/4.31"x0.59"
Qunaity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
No Retail Package
Package Contents:
1 x Drive Stepper Motor Screw with Nut Slider