M.2 to Usb Adapter, B Key M.2 Ssd Adapter Usb 3.0 with M.2 Nvme Ssd to Usb Adapter, M.2 Ssd to Type a Card

2 pcs Electronic Accessories:1 x NVME to USB Adapter & 1 x Adapter Card
This M.2 USB Adapter is a great M.2 SSD reader card for cloning or retrieving data
No USB cable needed, No trouble with forgetting USB cable, make connection easier!
5Gbps fast speed transfer with USB 3.0 interface, 10 times faster than USB 2.0, backward compatible with USB 2.0/1.0
Only compatible with M.2 SATA SSD (B+M key). DO NOT compatible with M.2 SATA SSD (B key) and M.2 NVME/AHCI SSD (M key)

Support Windows XP/7/8/10 OS, mac OS and Linux OS, Plug and play, no driver required.
Note: this converter only support NVMe PCIe based M.2 SSD (M Key below), doesn't support SATA based M.2 SSD (B Key or B+M Key) and AHCI PCIe based M.2 SSD (M Key)
Allows you to use an M.2 PCIE SSD 2242 / 2260 / 2280 ule with Key M through USB 3.0 or USB 3.1 port on your desktop or laptop.
Only Support Following M.2(NGFF) nVME SSD: Samsung XP941/ PM961/ SM962 Samsung SM951 PCIE-NVME ( MZVPV128HDGM MZVPV256HDGL MZVPV512HDGL) Samsung PM951 PCIE-NVME ( MZF128HCGR MZF256HCHP MZF512HCJH) Samsung 970 EVO,950 PRO (MZVKV256 MZVKV512),960 EVO Toshiba XG3/XG4 ,Intel 600P WD Black NVMe SSD .... and other M.2 PCI-e Based M Key NVMe SSD
Data transfer rate: USB 3.1 Gen 2 up to 10Gbps (Compatible with USB 3.1 Gen 1 / 3.0 / 2.0 / 1.1)
JMS583 Bridge Chip Based on the JMS583 USB3.1 Gen2 (10Gbps) to PCIe Gen3 x2 bridge chip This bridge chip translates the SSD's NVMe storage protocol into standard USB Mass Storage protocol or USB Attached SCSI Protocol (UASP), allowing for a portable SSD with much higher performance than the majority of portable SSDs that use SATA SSDs internally
Color: black + gold + blue
Material: PC + metal

Package Contents:
1 x NVME to USB Adapter
1 x Adapter CardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.