★ Connector accessories only, non-data cable ★
Using 2-in-1 design anodized aluminum process,
The back end plug does not need to be filled with glue at the back end, and the elongated drawing design increases friction.
After the plug terminal is welded, install it at the front, and the wire is drawn from the plug and screwed on the screw
The installation process can be completed, and it is also convenient for later maintenance.
Basic Information:
❀ The total length of the combination: about 37mm, the maximum allowable wire diameter: about 6mm
❀ Product outer diameter: about 11.2mm at the widest point
❀ Product process: CNC anodizing. Accessories included: screw and typec plug
❀ Installation method: After the plug is soldered, apply silicone rubber to the solder joints, lead out the wire from the rear end, and tighten the 2 locking screws.
Product advantages:
A: The maximum length of the combined body is about 37mm, and the thick shell shell does not need to add an adapter
B: Except the solder joints need to be fixed with insulating glue, the other places are glue-free and clean and environmentally friendly.
C: The combined two-in-one structure is convenient for fool-proof installation and maintenance.
D: The wire diameter supports 6mm, and the commonly used wire diameters of customized data lines are well supported.
Chi tiết sản phẩm| Kiểu kết nối | Không dây |
|---|
| Game chuyên dụng | Có |
|---|