Specification：
- Desoldering braid (wick) is a copper braid used in the rework and repair of printed
Circuit boards, computers, cell phones or other electronics.
- This wick is made from oxygen free copper
- Lets you easily remove the extra solder from components or pads on the circuit board
- Just press the braid onto the connection with a hot soldering iron
- This will soak up the copper waste super clean
- Length: 5FT (1.5M)/10FT (3.0M)
- Width: 1.5mm/2.0 mm/2.5mm/3.0mm/3.5mm
Package include：
1X Roll of Desoldering Wick
Note：
There is 2-3% difference according to manual measurement.
Please check the measurement chart carefully before you buy the item.
Please note that slight color difference should be acceptable due to the light and screen.