(YGD) LED Constant Voltage Dimmer Module Light Strip With Switch Board No Flicker 12V

Input voltage: DC6-24V
Size:30*28.8*13mm
Output Voltage: Equivalent to Input Voltage
Load current: within 5A maximum
Load power: maximum 120W
Dimming range: 0-100% stepless adjustment, five strobes
Working mode: constant voltage, with switch function
Recommendations:
1. The module has input reverse connection protection, no output short circuit protection, pay attention to check the wiring is correct and then connect
Electric work.
2. The voltage difference between the input and output of the module should not be higher than 3V, so that the dimming effect and efficiency are the best.
Such as: input 9V, with 2 strings of LEDs (light source must be connected in series with resistors to limit current), input 12V, with 3 strings of LEDs (light sources must be connected with resistors to limit current), input 24V, with 6-7 strings of LEDs (light sources must be connected with resistors for current limit)
Package list: 1pcs Dimming module