Please note:
This product is a product of the Xiaomi ecological chain, so there is no micro-label of Xiaomi.
Thank you for understanding
1.Don't mess with wiring if you are not sure about the line
2.The reverse connection of the neutral line may cause a short circuit and burn out the relay inside
3.Pay attention to the power and wiring
Installation Method 1(original switch remained)
Users can retain the original switch if they want to. The installation method is as following:
1. Loosen the screws on the device by a screwdriver.
2.Link the neutral line to the N hole, live line to the IN, load deivces(the lights) to the L1 & L2 respectively, and the load line on the original switch to the S1 & S2. (please note that L1 matches S2, L2 matches S1 )
3. Make sure the connection is coorect and then tighten the screws
Users can also remove the original switch and only control the power with the double relay controller wirelessly. The installation method is as following:
1. Loosen the screws on the device by a screwdriver.
2. Link the live line to the IN hole, Neutral to the N, Load devices(the lights) to the L1 & L2.
3. Make sure the connection is coorect and then tighten the screws.
Attention:This product must be used with a gateway and there must have a neutral line.
Product: LLKZMK11LM
Product Size: 49.3*46*24mm
Wireless Connections: Zigbee
Input Voltage: 100-250V, 50Hz
Maximum Load: 10A/2500W
Operating Temperature: -10°~+50°
Working Humidity:5%~95%RH